Konfigurasi Router RIP

Konfigurasi Console PC4

Router>en

Router#conf term

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#int fas0/0

Router(config-if)#ip ad 192.5.5.1 255.255.255.0

Router(config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#int fas1/0

Router(config-if)#ip ad 205.7.5.1 255.255.255.0

Router(config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0, changed state to up

Router(config-if)#exit

Router(config)#int se2/0

Router(config-if)#ip ad 201.100.11.1 255.255.255.0

Router(config-if)#clock rate 64000

Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial2/0, changed state to down

Router(config-if)#exit

Router(config)#

%LINK-5-CHANGED: Interface Serial2/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/0, changed state to up

Router(config)#Router RIP

Router(config-router)#Version 2

Router(config-router)#Network 201.100.11.0

Router(config-router)#Network 192.5.5.0

Router(config-router)#Network 205.7.5.0

Router(config-router)#

Konfigurasi Console PC 6

Router>en

Router#conf term

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#interface serial2/0

Router(config-if)#ip add 199.6.13.1 255.255.255.0

Router(config-if)#clock rate 64000

Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial2/0, changed state to down

Router(config-if)#exit

Router(config)#int se3/0

Router(config-if)#ip add 201.100.11.2 255.255.255.0

Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial3/0, changed state to up

Router(config-if)#exit

Router(config)#int fa

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial3/0, changed state to up

Router(config)#int fa0/0

Router(config-if)#ip add 219.17.100.1 255.255.255.0

Router(config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#exit

Router(config)#

%LINK-5-CHANGED: Interface Serial2/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/0, changed state to up

Router(config)#Router RIP

Router(config-router)#Version 2

Router(config-router)#Network 201.100.11.0

Router(config-router)#Network 219.17.100.0

Router(config-router)#Network 199.6.13.0

Router(config-router)#

Konfigurasi PC 8

Router>en

Router#conf ter

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#int se3/0

Router(config-if)#ip add 199.6.13.2 255.255.255.0

Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial3/0, changed state to up

Router(config-if)#exit

Router(config)#

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial3/0, changed state to up

Router(config)#int se2/0

Router(config-if)#ip add 204.204.7.1 255.255.255.0

Router(config-if)#clock rate 64000

Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial2/0, changed state to down

Router(config-if)#exit

Router(config)#int fa0/0

Router(config-if)#ip add 223.8.151.1 255.255.255.0

Router(config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#exit

Router(config)#

%LINK-5-CHANGED: Interface Serial2/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/0, changed state to up

Router(config)#Router RIP

Router(config-router)#Version 2

Router(config-router)#Network 199.6.13.0

Router(config-router)#Network 223.8.151.0

Router(config-router)#Network 204.204.7.0

Router(config-router)#

Konfigurasi Console PC 9

Router>en

Router# config ter

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#int se3/0

Router(config-if)#ip add 204.204.7.2 255.255.255.0

Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial3/0, changed state to up

Router(config-if)#exit

Router(config)#

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial3/0, changed state to up

Router(config)#int fa0/0

Router(config-if)#ip add 210.93.105.1 255.255.255.0

Router(config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#exit

Router(config)#Router RIP

Router(config-router)#Version 2

Router(config-router)#Network 204.204.7.0

Router(config-router)#Network 210.93.105.0

Router(config-router)#

Konfigurasi Console PC 10

Router>en

Router#conf ter

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#int fa0/0

Router(config-if)#ip add 210.93.105.2 255.255.255.0

Router(config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

 %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#exit

Router(config)#

Ini adalah hasil ping koneksi antar beberapa host yang coba dikoneksikan :